DOW 1-Component Products
These guns are recommended for use with DOW foam products.
Great Stuff Drywall Gasket Foam & Gun
Froth-Pak Two-component Kit—12 bd ft
FROTH12
Froth-Pak Two-component Kit—200 bd ft
FROTH180
Froth-Pak Two-component Kit—620 bd ft
FROTH600N
PU Foam 2-Comp, Froth Pak A & B,
650 bd ft Kit (1.75 PCF), Class 1
FROTH600NC1
2-Component Spray Foam
17-120 Gallon Refillable Systems
DOW FOAM PRODUCT LINEUP

DOW GREAT STUFF  WINDOW AND DOOR FOAM

Minimal expanding, single-component, low-pressure formulation and flexible polyurethane foam sealant. Great Stuff Pro Window & Door foam sealant is exclusively formulated to air-seal the gap between a window or door frame and its rough opening.

 
GREAT STUFF GAPS & CRACKS FOAM

Minimal expanding, single-component foam, recognized as an alternative fireblock penetration sealant. Evaluated by the International Code Council’s Evaluation Service, Inc. for use in residential construction. Great Stuff Pro Gaps & Cracks is tinted orange to be more recognizable to building code officials.

 

DOW ENERFOAM

Premium grade minimal expansion foam with a working temperature range of 25°–120° F. Trimmable in 20 minutes. This closed-cell foam is paintable
and waterproof. 

 

GUNS FOR DOW FOAM

Recommended for use with Enerfoam and Great Stuff Pro foam.
Note: ENER13 & ENER14, and ENERGUN are not recommended for use with other manufacturers’ foams.

GREAT STUFF  DRYWALL GASKET GUN & FOAM

Gun – Designed specifically for Great Stuff Pro™ Gasket, the blue-handled dispensing gun – colored to match the cans – allows for precise application of the foam. The gun is restartable, reusable and can be easily cleaned using a garden hose and the included cleanout adapter.

Foam – Designed to form a gasket-in-place foam where it is applied to the interior face of framing lumber, especially top and bottom plates, inside and outside corners and around rough openings. Effective at blocking air leaks past the top plate into the attic and through the bottom plate and the rim joist. Flexible and easily compressible.

FROTH PAK™

Two-component polyurethane spray foam that comes in portable kits. Ideal as an insulator and air-sealant, Froth-Pak bonds to most construction materials including lumber, plywood, particle board, foam board, masonry, metals, drywall, concrete and foam panels. Flame spread of 25 or less. Smoke development of 450 or less. It can be used to fill cavities, wall and floor penetrations, cracks and expansion joints. Includes 15′ hose.

 
CLASS 1 TWO-COMPONENT SPRAY FOAM

Multi-purpose two-component polyurethane froth foam specifically formulated for flame retardancy. It conforms to the requirements of ASTM E-84 as a “Class 1” system (flame spread of 25 or less, smoke development of 400 or less), and is designed to insulate, fill and seal various size voids, deaden sound or reduce vibration.

TWO-COMPONENT FOAM REFILL SYSTEMS

For a modest investment, upgrade or launch your spray foam insulation business with easy-to-use FROTH-PAK™ Foam Insulation Systems. Sized especially for residential and small commercial applications, these cost-effective systems are easy to handle and provide the same closed-cell foam performance as the drum systems. With 17-120 gallon capacities, you’ll always have enough foam to complete the entire project.

Affordable

  • Lower long-term cost of ownership compared to drum and rig system

  • Less upfront capital investment

  • Minimal set-up time

  • Less equipment maintenance

  • Low-cost replacement parts

  • No specialized technician required to maintain/repair

  • Can easily be added to insulation trucks to expand service offerings

  • Ability to work all year using Arctic-Pak heated hose system

  • Avoid disposal fees; keep material out of landfills

 
Want more information on DOW products?
For Homeowners: 866-240-4933
For Contractors: 800-666-8191

Back to Foam & Equipment